Lighting

Blendr is the ultimate integration system for clean and easy installation of lights, computers, and other accessories. Start with a Blendr stem, add the appropriate base, and finish with the Blendr High Ion Light Mount for a clean, flush look that securely holds your Bontrager Ion light above your stem to see and be seen. Key features: - Blendr is an elegant, integrated accessory mounting solution - Provides clean and secure mount for Bontrager Ion headlights - Works with any Blendr-compatible stem and the accompanying base - For use with Blendr bases (Pro, XXX, XXX bar/stem, and select Elite bases)

Blendr is the ultimate system for clean and easy integrated installation of lights, computers, and other accessories. Start with a Blendr stem, add the appropriate base, and finish with the Blendr MTB Ion Light Mount for a clean, flush look that securely holds your Bontrager Ion light in a perfect position to see and be seen. Key features: - Blendr is an elegant, integrated accessory mounting solution - Provides clean and secure mount for Bontrager Ion headlights - Works with any Blendr-compatible stem and the accompanying base - For use with Blendr bases (Pro, XXX, XXX bar/stem, and select Elite bases) - Integrated tab securely holds brake and derailleur housing to reduce clutter on MTB bikes

A compact remote with ANT+ wireless technology that allows for easy, on-bar control of your bike lights. Bontrager Transmitr MicroRemote allows you to wirelessly control the functions of up to four Bontrager RT lights simultaneously. This sleek, compact remote communicates with your lights using ANT+ wireless technology, mounts easily to any handlebar, and can even be used in place of a bar end plug with an additional mount. Keep your light controls within reach! - Communicates via ANT+ wireless technology - Compatible with all Bontrager RT front and rear bike lights - Can be paired with up to four lights simultaneously - Wirelessly controls light functions, including on/off and mode selection, and signals battery status - Easily mounts to handlebars, and can be used as a bar end plug (Bar End Mount sold separately) - Double-press powers on all lights; single press changes modes - Flashing LED when powered on indicates low battery in one or more connected lights - Includes CR1632 battery, handlebar mount, and quick-start manual - Battery: CR1632 (Coin) - Weight: 12g

Small but powerful The Ion 100 R is daytime visible and designed for the city. A wide beam spread, focused optics, and an interruptive flash pattern make it visible from over 500m during the day. A built in ambient light sensor provides auto-brightness control, and the included Quick Connect bracket offers simple removal for recharging via the included USB cable. - Focused optics provide be seen safety with a broad but powerful light - Integrated light sensor auto-adjusts brightness in flash mode - 100 Lumens via high-power CREE LED - Ideal for handlebar or on bike mount - 100LM-1.5hrs, 50LM-3hrs,5LM-16hrs, Night Flash-7hrs, Day Flash-5hrs - Includes quick connect bracket and micro USB charging cable - Blendr compatible, secure bar mount available

Bontrager's Ion 120 and Flare 1 light set is at the ready to keep you shining on every ride! These front and rear lights are simple, powerful, and easy to use. Plus, they feature long-lasting steady and flash modes and easily attach to virtually any handlebar and seatpost with the included mounts. - Ion 120 offers high, low, and flash modes for versatile lighting options - Sync bracket allows for quick and easy adjustment, mounting, and removal - Flare 1 features three modes—steady, flashing, and random flashing - Included seatpost clamp and belt clip mount for versatile mounting options - Set includes: Ion 120 front light, Flare 1 rear light, and mounts - 50+ hour battery life, front and rear - Includes all required batteries (5 AAA) - Rechargeable: No - Weight: 135g

Welcome to the future The Transmitr Remote wirelessly controls up to seven Transmitr ready devices. It easily attaches to any bike's handlebars for convenient on the bar control of all Transmitr lights. The ANT+ enabled Transmitr remote is compatible with all Transmitr products and allows for wireless on/off, mode selection, real time light battery status, and more. - Transmitr remote can simultaneously control up to 7 lights - ANT+ enabled for use with all Transmitr products - Use Transmitr system for wireless on/off, mode selection, and more - Can be used with multiple Flare RT lights for turn signal configuration - Includes CR2032 battery, mount, and quick-start manual

Everything you need to be seen on city streets and paths. Party in the front and in the back One light set for a complete daytime running lights solution. The Ion 100 R and Flare R City feature focused optics, an interruptive flash pattern, and broad range to ensure visibility. Their compact design and wide beam spread are optimized for city riding and make these USB rechargeable lights great for any bike. Product details 1 - Be seen with a broad, powerful beam and balanced optics designed for city riding 2 - Includes Ion 100R, Flare R City, two quick connect brackets, and a micro USB charging cable 3 - Bontrager Daytime Running Lights feature flash, focus, and range to be seen during the day 4 - USB rechargeable

A compact and powerful front light with lasting brightness that makes it easy to see the street, path, or trail and features a dedicated Daytime Running Light mode that can be seen from 2km away, even during daylight hours. Ion Comp R packs the power of lasting light into a sleek, compact design that's at home on any road, mountain, or city bike. Light your way with five modes, including a Daytime Running Light mode that's designed to increase rider visibility during the day and can be seen from 2km away. Product Details - Ion Comp R provides a powerful beam that illuminates the street, path, or trail - A warm, wide 700-lumen beam allows for confident night riding with a great depth of field - DRL-specific focus, flash, and range flash patterns offer ultimate daytime visibility - Long-lasting brightness exceeds FL1 industry standards and outlasts the competition - Runtimes: 700LM—1.5hrs, 500LM—3hrs, 300LM—6hrs, 300LM day flash—19hrs, 200LM night flash—9hrs - Blendr-compatible for integrated mounting on compatible Blendr stems, helmets, and helmet mounts - Quick Connect+ offers secure installation with a flexible mount that's compatible with all bars 22.2 to 35mm - Includes Ion Comp R light, Adjustable Quick Connect+ Mount, and micro USB charging cable

A powerful front bike light with a wide beam that illuminates any road or trail and can be seen from 2km away as a daytime running light. Ride with confidence, day or night, with the Ion Elite R Front Bike Light. This USB-chargeable light features a powerful beam with a wide pattern perfect for the road, path, or trail. Designed to offer lumens that last, Ion Elite R lets you ride longer with sustained brightness and features five modes including day flash for use as a daytime running light. - Ion Elite R provides a powerful beam that lights up the full width of any road or trail - A warm, wide 1000 lumen beam allows confident night riding - Specifically designed focus, flash, and range flash patterns offer ultimate daytime visibility - Long-lasting brightness exceeds industry standards - 1000lm-1.5hrs, 650lm-3hrs, 350lm-6hrs, night flash-26hrs, day flash-22hrs - Adjustable hard mount attaches securely to handlebars between 25.4-35.0mm - Blendr compatible with available helmet mount - Includes an adjustable hard mount and micro USB charging cable - Battery: 5000Li-Ion - Weight: 187g

A compact and powerful light set designed to help riders see and be seen on the street, path, or trail. Ion Comp R provides compact power to help illuminate the street, path, or trail, and Flare R City rear tail light helps you stand out. Both are USB-rechargeable Daytime Running Lights that feature distinctive focus, flash, and range flash patterns designed to boost visibility. Product details - Dedicated Daytime Running Light modes on both lights designed for increased visibility - Ion Comp R provides a warm, wide 700-lumen beam for confident night riding and a great depth of field - Flare R City delivers a wide, 35-lumens beam that's ideal for city use - DRL-specific focus, flash, and range flash patterns offer ultimate daytime visibility - Blendr-compatible for integrated mounting on compatible Blendr stems, helmets, and helmet mounts - USB-rechargeable with included micro USB cable

Stay trail-ready and daytime visible with this powerful light set packed with industry leading features. See and be seen The ultimate "see and be seen" bicycle light combo, this set is the easiest way to stay safe when you ride. The Ion Pro RT provides enough power to light up any trail, and the Flare RT is the ultimate daytime running rear light. Both are USB rechargeable and feature distinctive daytime flash settings that are visible from up to 2km during the day. Product details - Ion Pro RT provides a powerful beam that lights up the full width of any road or trail - Flare RT provides ultimate visibility for any road, city, or path - Connect with Garmin and Bontrager ANT+ devices for always on, battery status, and wireless control - Specifically designed focus, flash, and range flash patterns for daytime visibility for up to 2km - Easily attaches to your handlebars, helmet, or bike mount

- Supercharged 1:30 to 95 hour run time - Extremely powerful 1,500 lumens in an astonishingly compact and stylish form. - Cycling Tuned Optics throws a long range, extra wide beam to cover road and mountain biking - Daytime visible flashes make you stand out on busy streets. - Two-button design lets you fine tune the brightness and flash speeds to your cycling needs. - Expand run times beyond factory default settings by fine tuning the brightness modes and flash speeds. - 9 lighting modes for day and night use - SteadyPulse mode alerts motorists with attention grabbing pulses while its overlapping steady beam constantly lights your way at night - DayLightning flash mode bursts lightning-like flashes to make you stand out in broad daylight on busy streets - 252 grams - IP67 water resistant for use in all weather conditions - USB rechargeable with 5 hours recharging time - Designed, engineered, and assembled in the USA.

- Supercharged 1:15 to 85 hour run time. - Extremely powerful 1,800 lumens in the most compact and stylish form. - Cycling Tuned Optics throws a long range, extra wide beam to cover road and mountain biking - Daytime visible flashes make you stand out on busy streets - Two-button design lets you fine tune the brightness and flash speeds to your cycling needs. - Expand run times beyond factory default settings by fine tuning the brightness modes and flash speeds - 9 lighting modes for day and night use - SteadyPulse mode alerts motorists with attention grabbing pulses while its overlapping steady beam constantly lights your way at night. - DayLightning flash mode bursts lightning-like flashes to make you stand out in broad daylight on busy streets - 252 grams - IP67 water resistant for use in all weather conditions - USB rechargeable with 5 hours recharging time - Designed, engineered, and assembled in the USA

Replacement Micro USB recharging cable for Lezyne Macro Drive, Mini Drive XL, Power Drive XL, and Super Drive XL LED Lights.

Mount the Nip light to an e-Bike that has the specialty Pro Max stem for accessories.

Replacement seat post mount for the Tuck e-Bike Taillight. Secure design with non-slip strap ensures light is stationary even in rough, bumpy terrain. - Includes plastic wedge spacers to ensure Tuck mounts at optimum angle for premium visibility

We understand lights are an integral part of your daily commute. Using a light can mean the difference between being seen or not by automobile drivers. Many of the "entry level" commuter lights are nothing more than "be seen" lights. Your overall safety and visibility should not be limited by your budget, and that's why we created the Mako Series. The Mako line offers four models and up to 250 lumens, not only allowing the cyclist to be seen but allowing the cyclist to see as well. The Mako line is easy on the wallet and easy to operate. For much of night riding, the key to survival is not only seeing but also being seen, the CherryBomb 100 addresses the latter. By incorporating a unique multi-directional collimator specifically designed for cycling, the CherryBomb 100 maximizes visibility by dispersing light to the sides of the rider as well as to the rear, effectively eliminating blind spots to upcoming automobiles. To further rider safety and visibility, the CherryBomb 100 employs a custom-made, built-in reflector which allows the rider to be night time visible even when the taillight is in the off position. Clip and bike mounts are included, for flexible mounting options. Mako 250 - Low cost, high powered light - Highly visible in traffic = keeps you safe - Run Time: 7:00 – 28:00 hours - 3 light settings—High, Low, and Flash - Tough durable design - Water / Dust Resistant IP64 Rated CherryBomb 100 - Daylight Visible Flash (DVF) - Up to 136 hour run time - Visible up to 1 mile - Internal reflector = visible if light in off mode - Easy to operate AAA batteries - Super bright day time flash mode - Be Seen by cars = Be Safe - Water / Dust Resistant IP64 Rated

The Swift 300 gives you more than enough lumens at our lightest weight for headlights (82 grams). NiteRider makes this headlight USB rechargeable for convenient on-the-go charging. The Swift 300 features a highly durable light housing with Dupont Fiberglass reinforced nylon meeting all required FL1 Standards for impact testing and water / dust resistance. Vmax+ 150 is NiteRider's first taillight featuring COB (Chip-on-Board) LEDs, which for cyclists means it emits highly visible flash patterns in a smaller, more compact package. Its feather-like light weight makes it perfect as a wearable safety light-easily clipping onto straps, belt loops, and more. SWIFT 300 FRONT LIGHT FEATURES - Lumen Output: 300 - 5 Modes with Run Times: 2:00 – 28:00h - Charge Time: 2:00h at greater than 500mA | 3:15h at 500mA - Water / Dust Resistant IP64 Rated - USB Rechargeable SWIFT 300 TYPICAL RUN TIMES Low—15:00h at 80 Lumens Med—9:00h at 150 Lumens High—2:00h at 300 Lumens Flash—12:00h at 300 Lumens Walk—28:00h at 20 Lumens Vmax+ 150 TAILLIGHT FEATURES - Lumen Output: 150 - 6 Modes with Run Times: 5:30-27:30h - Charge Time: 2:00h - Water / Dust Resistant IP64 Rated - USB-C Rechargeable Vmax+ 150 TYPICAL RUN TIMES Fast Flash—12:45h Slow Flash—10:15h Disco Flash—10:45h Pulse Flash—7:00h High Steady—5:00h Low Steady—27:00h

USB cable for charging NiteRider® bike lights that utilize a micro USB charge port connection System Compatibility - All Lumina Series - Swift Series - MiNewt Cordless Series - MiNewt Mini Series - Lightning Bug 120 - Sentinel - Solas - Omega - Sabre - Sentry Aero - Stinger

The NiteRider Adjustable Angle Tail Light Strap Mount was specifically designed for our flagship tail light, the Sentinel. It allows you to fine-tune the mounting angle of the light to display the projected Laser Lanes even and parallel on the ground. It's an easy on and off non-slip tail light mount that also features a grooved contact pad that makes this the 'go to' mount for riders using aero seat posts. System Compatibility - Sentinel - Solas - Sabre - CherryBomb

The NiteRider Lumina Handlebar Strap Mount offers a wide variety of handlebar size fitments and remains rock solid while riding through rough terrain. It’s easy to install and, like all NiteRider mounts, features a quick release tab for when it’s time to recharge or leave your bike unattended. System Compatibility: - Lumina Series - Mako Series - MiNewt Cordless Series

The NiteRider Tail Light Rack Mount gives you the option to mount your tail light directly onto your rack-ready/-equipped bike via this rack mount accessory. System Compatibility - Sentinel - Solas - Sabre - CherryBomb - TL 5.0 SL

The NiteRider Lumina Stick-On Mount is ideal for non-vented helmet mounting applications. Whether it be your favorite downhill/MX style helmet or explore the versatility of your Lumina head light by mounting it onto an industrial hard hat making it the ultimate work light! System Compatibility - Lumina Series - MiNewt Mini Series - Mako Series

The NiteRider Hardshell Helmet Mount gives you the option to mount your head light directly onto your hardshell helmet using high strength 3M VHB adhesive. ?Not compatible with Lumina Series Lights. System Compatibility - Pro Series - HID Series - Classic Plus & Select - Evolution & Digital Evolution - HeadTrip & Digital HeadTrip - TrailRat & TrailRat Select - RoadRat - Digital Patrol LED - Digital Patrol - Pre 2001 systems

Helmet mount for all systems that use the slider mounting clip. Not compatible with Lumina Series Lights. System Compatibility - Pro Series - HID Series - Classic Plus & Select - Evolution & Digital Evolution - HeadTrip & Digital HeadTrip - TrailRat & TrailRat Select - RoadRat - Digital Patrol LED - Digital Patrol - Pre 2001 systems

NiteRider understand lights are an integral part of your daily commute. Using a light can mean the difference between being seen or not by automobile drivers. Many of the "entry level" commuter lights are nothing more than "be seen" lights. Your overall safety and visibility should not be limited by your budget, that's why NiteRider created the Mako Series. The Mako line offers three models and up to 250 lumens, not only allowing the cyclist to be seen, but allowing the cyclist to see as well. A favorite feature is the side "gills" that emits light, it not only looks cool, but makes the Makos more visible. The Mako line is easy on the wallet and easy to operate. - Side lights - Economical, high output light - Super bright flash setting ideal for daylight use - Easy operation battery operated (comes with 2 x AA) - 3 light settings – High, Low and Flash - Lumen Output: 200 - Run Time: 15:00 – 60:00hrs - Weight: 175g - Battery: Alkaline AA x 2 WARRANTY The Mako 200 is backed by NiteRider's lifetime warranty that covers any defects in material and workmanship, mechanical components (housings, covers, mounts and fasteners) and LEDs. SYSTEM INCLUDES - LED Light Head - Handlebar Mount - 2 AA Alkaline Batteries

The Explorer headband adjusts to various head shapes and sizes. System Compatibility: - Explorer 350 - Pro Series - HID Series - Classic Plus & Seclect - Evolution & Digital Evolution - HeadTrip & Digital HeadTrip - TrailRat & TrailRat Select - RoadRat - Digital Patrol LED - Digital Patrol - Pre 2001 systems

NiteRider understand lights are an integral part of your daily commute. Using a light can mean the difference between being seen or not by automobile drivers. Many of the “entry level” commuter lights are nothing more than “be seen” lights. Your overall safety and visibility should not be limited by your budget, that's why NiteRider created the Mako Series. The Mako line offers four models and up to 250 lumens, not only allowing the cyclist to be seen, but allowing the cyclist to see as well. The Mako line is easy on the wallet and easy to operate. - Low cost, high powered light - Highly visible in traffic = keeps you safe - 3 light settings – High, Low and flash - Tough durable design - Lumen Output: 250 - Run Time: 12:30 – 28:00hrs - Weight: 175g - Battery: Alkaline AA x 2 WARRANTY The Mako 250 is backed by NiteRider's lifetime warranty that covers any defects in material and workmanship, mechanical components (housings, covers, mounts and fasteners) and LEDs. SYSTEM INCLUDES - LED Light Head - Handlebar Mount - 2 AA Alkaline Batteries

Handlebar mount for all systems that use the slider mounting clip. Fits handlebar clamp diameters from 25.4mm–35mm. System Compatibility: - Pro Series - HID Series - Classic Plus & Select - Evolution & Digital Evolution - HeadTrip & Digital HeadTrip - TrailRat & TrailRat Select - RoadRat - Digital Patrol LED - Digital Patrol - Pre 2001 systems

NiteRider's patented mount is ideal for side mounting your Pro Series lighting system to your MX / full face helmet. The NiteRider Jawbone Mount for Pro Series is constructed of high strength materials and adjusts easily to fit most chin bars. System Compatibility - Pro Series Lighting Systems (All) Accessory Includes - Jawbone Mount for Pro Series (Lighting system sold separately)

Packed with 3 high-performance LEDs, the all-new Omega 300 raises the bar within NiteRider line of Daylight Visible Flash tail lights. The Omega 300 is designed and regulated to maximize output and runtime, boasting a hearty 6-hour runtime in its brightest Daylight Visible Flash mode setting. In 2012, NiteRider launched an awareness campaign 'Lights 4 Lives'. The overriding goal was simple; spread the message of using lights not only during the night, but equally important, during the day for added safety and visibility. And the Omega 300 is the epitome of NiteRider's safety initiative. - Daylight Visible Flash (DVF) - 300 lumen super bright tail light - Group Ride Mode – be seen without distracting fellow cyclists - Easy on and off seat post strap mount with quick release tab - Convenient USB rechargeable - Be Seen by cars = Be Safe - FL1 Standard IP64, dust and water-resistant WARRANTY - The Omega 300 is backed by NiteRider's lifetime warranty that covers any defects in material and workmanship, mechanical components (housings, covers, mounts and fasteners) and LEDs. SYSTEM INCLUDES - LED Tail Light - Seat post Mount - USB Cable

The NiteRider Sentinel 250 is designed to increase cycling safety by way of 2 varying flash patterns and 2 steady beams (High/Group Ride Mode). Behind the durable red lens and casing are two powerful LEDs that emit 250 lumens in the brightest Daylight Visible Flash setting, allowing you to be seen day or night. For enhanced safety, the Laser Lane modes (3) are designed to project ultra-bright laser lines on the ground. This creates a virtual lane for the rider, further increasing visibility. - The Sentinel 250 complies with FDA standard for lasers, notice No. 50, 2007 - Daylight Visible Flash (DVF) - Highly visible laser lanes - All in one, Laser and tail light! - Convenient USB rechargeable - Group Ride Mode – be seen without distracting fellow cyclists - Easy on and off seat post strap mount with quick release tab - FL1 Standard IP64, dust and water-resistant WARRANTY - The Sentinel 250 is backed by NiteRider's lifetime warranty that covers any defects in material and workmanship, mechanical components (housings, covers, mounts and fasteners) and LEDs. SYSTEM INCLUDES - LED Tail Light w/ Laser Lanes - Seat post Mount - USB Cable

The Adventure line of NiteRider Headlamps receive a healthy bump-up in lumens this year. Now pumping 320 lumens output on High. Featuring a lightweight yet rugged build quality, the Adventure 320 Pro is a bright, versatile light that delivers reliability through NiteRider’s long history of outdoor digital electronics; so you can continue on through the darkest of nights. Equipped with our Pivot Stick-on Mount, this light easily mounts to most flat smooth surfaces. Meets FL 1 Standard IP67, protected against the effects of immersion in water to depth between 15 cm and 1 meter. - 4 Light Levels plus 1 Night Vision Mode - 4 Safety Flash Modes, including SOS - FL1 Standard IP67, water immersion ok between 15 cm and 1 meter - Removable mount - Adjustable light angle - Lightweight, weighing in at just 70 grams - Convenient USB rechargeable - Low battery indicator WARRANTY - The Adventure 320 Pro is backed by NiteRider’s lifetime warranty that covers any defects in mechanical components (housings, covers, mounts and fasteners) and LEDs. SYSTEM INCLUDES - LED Headlamp - Internal Li-Po Battery - Pivot Stick-on Mount - USB Charging Cable

The Adventure line of NiteRider Headlamps receive a healthy bump-up in lumens this year. Now pumping 320 lumens output on High. The Adventure 320 features advanced components that deliver optimal performance with multiple output settings including an SOS safety flash. Inside the lightweight body, a lithium polymer battery conveniently charges via USB, reducing waste of disposable alkaline batteries. The Adventure 320 is a well-rounded performer that shines right where you need it so that you can focus on your night adventure. There is a Tail Light Clip that is incorporated on the back that fits all NiteRider Tail Lights and provides greater safety for walking or running at night. Meets FL 1 Standard IP67, protected against the effects of immersion in water to depth between 15 cm and 1 meter. - Tail Light Clip – fits most NiteRider Tail Lights and provides greater safety for walking or running at night. - 4 Light Levels plus 1 Night Vision Mode - 4 Safety Flash Modes, including SOS - FL1 Standard IP67, water immersion ok between 15 cm and 1 meter - Adjustable headstrap tabs for quick and easy fitment - Adjustable light angle - Fits Pivot Stick-on accessory mount (Sku# 8727 sold separately) - Lightweight, weighing in at just 87 grams - Convenient USB rechargeable - Low battery indicator SYSTEM INCLUDES - LED Headlamp - Internal Li-Po Battery - Comfortfit Headstrap with Rear Tail Light Clip - USB Charging Cable

Lumina Micro series delivers high output in a small package, making it great for helmet usage. Features a modular designed lightweight body combined with increased thermal properties ensuring a brighter, longer lasting LED and a newly designed handlebar strap mount with quick-release tab - 4 light levels plus a flash mode - Lumina Micro 900 and 650 include a VMAX+ - Lumens: 650/80 - Run time: up to 50 hrs F/up to 27 hrs R - Weight: 130g/28g

The NiteRider Lumina 1200 Boost provides enough light that it can be used in just about all riding conditions, whether it be on the road, on your favorite mountain biking trail, or hand-held in Walk Mode. Specifically designed to meet the needs of riders in all cycling categories, the Lumina 1200 Boost features the Boost Mode light setting. Simply double click the power button, giving you the option to operate your light at maximum light output! And utilizing a CREE LED at 6000k, means you'll get what most consider to be the best LEDs available on the market today. These high performance LEDs are extremely reliable, with no filament to break or burn out. With the all new custom engineered collimator optics, the Lumina 1200 Boost projects a beam pattern that provides a generous widespread and even beam pattern of 1200 brilliant lumens! The high-strength head light body casing is comprised of lightweight aluminum and Dupont Fiberglass reinforced nylon that is highly durable. - All New Collimator Lens, distributes a generous even widespread beam pattern - Boost Mode, double tap power button to unleash maximum LED output at 1200 lumens! - 5 Light Levels plus 1 Daylight Flash Mode - FL1 Standard IP64, dust and water-resistant - Secure on and off-road capable handlebar mount - Fits standard and oversize 35mm handlebars - Perfect for helmet mounting (Helmet Mount sold separately) - IntelliCharge – Reduce charge time in half! - Convenient USB rechargeable - Low battery indicator - Lock Mode, perfect for use during storage and transporting the light. Press and hold power button for 7 seconds to lock out operation of light. WARRANTY -The Lumina 1200 Boost is backed by NiteRider's lifetime warranty that covers any defects in material and workmanship, mechanical components (housings, covers, mounts and fasteners) and LEDs. SYSTEM INCLUDES - LED Light Head - Internal Li-Ion Battery - Handlebar Mount fits up to 35mm - USB Charging Cable

Producing 900 brilliant lumens, the NiteRider® Lumina™ Micro 900 is smaller, lighter, and more compact than the original Lumina™ series. Vmax+™ 150 is NiteRider’s first taillight featuring COB (Chip-on-Board) LEDs, which for cyclists means it emits highly visible flash patterns in a smaller, more compact package. Its feather-like light weight makes it perfect as a wearable safety light—easily clipping onto straps, belt loops, and more. For added convenience, the Vmax+ 150 features mode memory, will power ON in the last mode used. LUMINA™ MICRO 900 FEATURES - Lumen Output: 900 - 5 Modes with Run Times: 2:00 – 60:00h - Charge Time: 2:30h at greater than 500mA | 4:30h at 500mA - Weight: 130g - Low Battery Indicator and Micro USB Rechargeable - Water / Dust Resistant IP64 Rated LUMINA™ MICRO 900 RUN TIMES Low - 11:00h at 200 Lumens Med - 4:30h at 450 Lumens High - 2:00h at 900 Lumens Flash - 11:00h at 900 Lumens Walk - 60:00h at 30 Lumens Vmax+™ 150 TAILLIGHT FEATURES - Lumen Output: 150 - 6 Modes with Run Times: 5:30-27:30h - Charge Time: 2:00h - Water / Dust Resistant IP64 Rated - USB-C Rechargeable - Mode Memory (Powers ON in the last mode used) Vmax+™ 150 RUN TIMES Fast Flash - 11:30h Slow Flash - 9:30h Disco Flash - 9:45h Pulse Flash - 6:00h High Steady - 4:30h Low Steady - 25:30h Note: The NiteRider® Lumina™ Micro 900 is shipped from the factory in Travel Lock Out Mode. This mode feature is designed to save battery power by preventing the headlight from accidentally turning on while in storage. Simply press and hold the power button for 8-10 seconds to lock/unlock.

The NiteRider Lumina 1200 Boost provides enough light that it can be used in just about all riding conditions, whether it be on the road, on your favorite mountain biking trail, or hand-held in Walk Mode. Specifically designed to meet the needs of riders in all cycling categories, the Lumina 1200 Boost features the Boost Mode light setting. Simply double click the power button, giving you the option to operate your light at maximum light output! And utilizing a CREE LED at 6000k, means you’ll get what most consider to be the best LEDs available on the market today. These high performance LEDs are extremely reliable, with no filament to break or burn out. With the all new custom engineered collimator optics, the Lumina 1200 Boost projects a beam pattern that provides a generous widespread and even beam pattern of 1200 brilliant lumens! The high-strength head light body casing is comprised of lightweight aluminum and Dupont Fiberglass reinforced nylon that is highly durable. The NiteRider Solas 250 uses two powerful LEDs to produce an amazing 250 lumens of light output. It features 4 modes (2 flash / 2 steady) and is USB rechargeable. We’ve implemented what we call “Group Ride Mode” for cyclists who want to stay visible but not distract others in the pack. LUMINA 1200 BOOST - All New Collimator Lens, distributes a generous even widespread beam pattern - Boost Mode, double tap power button to unleash maximum LED output at 1200 lumens! - 5 Light Levels plus 1 Daylight Flash Mode - FL1 Standard IP64, dust and water-resistant - Secure on and off-road capable handlebar mount - Fits standard and oversize 35mm handlebars - Perfect for helmet mounting (Helmet Mount sold separately) - IntelliCharge – Reduce charge time in half! - Convenient USB rechargeable - Low battery indicator - Lock Mode, perfect for use during storage and transporting the light. Press and hold power button for 7 seconds to lock out operation of light. SOLAS 250 - Daylight Visible Flash (DVF) - 250 lumen super bright tail light - Group Ride Mode – be seen without distracting fellow cyclists - Easy on and off seat post strap mount with quick release tab - Convenient USB rechargeable - Super bright daytime flash mode - Be Seen by cars = Be Safe - FL1 Standard IP64, dust and water-resistant WARRANTY - The Lumina 1200 Boost and Solas 250 are both backed by NiteRider’s lifetime warranty that covers any defects in mechanical components (housings, covers, mounts and fasteners) and LEDs. SYSTEM INCLUDES - LUMINA 1200 BOOST - LED Light Head - Internal Li-Ion Battery - Handlebar Clamp Mount (Fits up to 35mm) - USB Charging Cable SOLAS 250 - LED Tail Light - Seatpost Mount - USB Cable

The NiteRider Lumina OLED 1200 Boost is an innovative bike light that removes the guesswork related to battery life, allowing you to plan your next ride safely with complete confidence, day or night. The OLED multifunctional digital display screen delivers precise battery run times as a percentage and actual time for the Lumina OLED's 9 lighting levels. The Lumina OLED 1200 Boost features a custom engineered collimator sense, producing a generous widespread beam pattern. With Boost Mode providing a stunning 1200 lumens of maximum light output, this makes the Lumina OLED highly capable for use when navigating through diverse riding conditions. The NiteRider Solas 250 uses two powerful LEDs to produce an amazing 250 lumens of light output. It features 4 modes (2 flash / 2 steady) and is USB rechargeable. We’ve implemented what we call “Group Ride Mode” for cyclists who want to stay visible but not distract others in the pack. LUMINA OLED 1200 BOOST - New Collimator Lens, distributes a generous even widespread beam - Boost Mode! Unleash maximum LED output - 5 Light Levels plus 4 Daylight Flash Modes - CREE LED at 6000k - Multifunctional OLED screen provides detailed operational information - FL1 Standard IP64, water resistant - Intellicharge – Reduce charge time in half! - Backlit buttons for easy to use interface in any lighting condition - Secure on and off-road capable handlebar mount - Fits standard and oversize 35mm handlebars - Convenient USB rechargeable SOLAS 250 - Daylight Visible Flash (DVF) - 250 lumen super bright tail light - Group Ride Mode – be seen without distracting fellow cyclists - Easy on and off seat post strap mount with quick release tab - Convenient USB rechargeable - Super bright daytime flash mode - Be Seen by cars = Be Safe - FL1 Standard IP64, dust and water-resistant WARRANTY - The Lumina OLED 1200 Boost is backed by NiteRider's lifetime warranty that covers any defects in material and workmanship, mechanical components (housings, covers, mounts and fasteners) and LEDs. SYSTEM INCLUDES LUMINA OLED 1200 BOOST - LED Light Head with OLED Display - Internal Li-Ion Battery - Handlebar Mount fit up to 35mm - USB Charging Cable SOLAS 250 - LED Tail Light - Seatpost Mount - USB Cable

The Pro 2200 boasts one of the category's best power-to-weight ratios. With 2200 lumens of light output, using 3 CREE LEDs- set into a NiteRider custom reflector, guarantees to set the darkest bike trail ablaze. It features an accurate eight-step fuel gauge, keeping the rider informed of battery levels at all times. These attributes make the Pro 2200 the "go to" light among the world's top athletes and enthusiasts alike. - Compact and lightweight, perfect for race inspired riders - Custom 3 cone reflector producing brilliant trail illumination - 3 – class leading CREE LEDs at 6000k - Rugged design with Dupont Fiberglass reinforced nylon housings - Handlebar mount fits up to 35mm diameter bars - Helmet mountable - Lightweight 4 cell Li-Ion battery - Easily check battery power levels with the 8 step fuel gauge - FL 1 Standard IP64, dust and water-resistant - Convenient nylon storage pouch WARRANTY The Pro 2200 Race is backed by NiteRider's lifetime warranty that covers any defects in material and workmanship, mechanical components (housings, covers, mounts and fasteners) and LEDs. SYSTEM INCLUDES - LED Headlamp - Li-Ion Battery - Helmet Mount - Handlebar Mount – Fits up to 35mm - 36" Extension Cable - AC Adapter - Nylon Storage Pouch

Boasting 4200 lumens and 6 CREE LEDs at 6000k; the Pro 4200 Enduro offers 4 brightness settings and a daylight flash mode that are factory-tuned to optimize riding in any condition. And, a long-lasting 8-cell battery that doubles as a USB portable charger makes this lighting system perfect for long night rides, high speed MTB descents, or backcountry touring. - Ultra bright 4200 lumen output - 8 Cell Li-Ion battery, doubles as a USB portable charger - Remote switch for ease of operation - The preferred light for serious MTB riders - Highly durable light housing with Dupont Fiberglass reinforced nylon - Perfect for handlebar mounting - FL 1 Standard IP64, dust and water-resistant - 4 steady light modes and 1 daylight flash - Custom 3 cone dual-beam reflectors utilizing 6 CREE LEDs at 6000k - Convenient nylon storage pouch Warranty: - The Pro 4200 Enduro Remote is backed by NiteRider's lifetime warranty that covers any defects in material and workmanship, mechanical components (housings, covers, mounts and fasteners) and LEDs. System Includes: - LED Headlamp with Remote Switch - Li-Ion Battery/USB Portable Charger - Handlebar Mount - Fits up to 35mm - AC Adapter - Nylon Storage Pouch

The PDW Kepler eBike Tail Light offers up 220 degrees of visibility. Compatible with any 6V-15V system, this light has 3 super-bright red LED's. Equipped with a pre-installed Bosch plug, the Kepler eBike Tail Light is ready to plug directly into any Bosch eBike system. The Bosch plug can also easily be clipped off for direct wiring into other eBike systems. - Seatpost or seatstay mounting - 220 degrees of visibility - 25 Lumens - 48" cable length - Remove Bosch plug to work with any 6V-15V e-bike system

Replacement Part – Universal Rack Mount - Fits all Serfas tail lights (Except TST-70, TST-100, & TBT-50R) - Bolts to rack for easy removal of tail light

Brighten up your style, increase your visibility, and make those nighttime rides more fun with the Serfas SPK Spoke Lights! Available in FIVE fun LED light colors: White, Red, Green, Multicolored, and Blue. The SPK Spoke Light is quick and easy to mount and sure to stay safely secured while traveling across any terrain, and with built-in water resistance the SPK ensures a splash or two won't send you home in the dark. Add one, or even twenty, to your bike today and be the coolest cat on the block! - Water Resistant - Fast & Easy Installation / Removal - Solid Modes: Up To 30 Hours - Flash Modes: Fast – Up To 35 Hours / Slow – Up to 55 Hours - Weight: 20 Grams - Size: 12.8cm x 4.4cm - Battery: 1 x Lithium CR2032

Replacement Part – TST Tail Light Saddle Rail Mount Allows mounting of tail light direct to saddle rails. Compatible With: TST-70 TST-100 TST-150 TBT-50R

Replacement Part – Universal Handlebar Bracket - Fits all current Serfas headlights with a removable bracket - Fits bars up to 31.8mm horizontal & vertical adjustable - Easily removes from bar in seconds - No tools needed - Works With: TSL-100, TSL-150, TSL-150+, TSL-200, TSL-250, TSL-250+, TSL-500, TSL-500+, TSL-1000, TSL-1500, SL-155, SL-255, USL-155, USL-305, USL-505, TSL-350, TSL-550, TSL-750, TSL-T1000, TSL-LT1000, TSL-1200, TSL-1800, TSL-2500, HL-1.1, & SL-30WP - Works for all Serfas headlights EXCEPT for SL-200 & SL40WP

Replacement Part – Oversized Handlebar Bracket (35mm) - Reinforced internals take more abuse - Fits oversized 35mm mtb bars - No tools needed - Included with USL-1100 & USL-1500 - Weight: 40 grams - Works for all Serfas headlights except for: SL-200, SL-30WP, & SL-40WP

Apollo is a waterproof super bright LED light that is small and easy to mount. It comes in Headlight, Tail Light, USB Headlight, USB Tail Light and Combo pack. - Super Bright LED - 50 hrs runtime on steady - 150 hrs runtime on flash - Aluminum Body - Extremely adjustable release strap - Waterproof - 240 degree visibility

The Serfas Apollo is a super compact LED light which packs a bright punch in a tiny waterproof metal housing. Mounts in seconds using the attached mini molded rubber ladder strap and hook system. Powered by (2) replaceable CR2032 batteries. Features - Strap Fits Bars 20 – 40mm - Waterproof - 240° Visibility - Perfect For Stores Without Counter Space Specs: - Modes: Solid 50 hrs, Flash 150 hrs - Weight: 29 Grams With Bracket - Runtime: Up To 50 hrs On Flash - Battery: (2) CR2032

Replacement Part – Headlight Bracket - Fits all Serfas headlights - Long silicone strap allows endless mounting options - No tools needed - Cannot be used with: TST-70, TST-100, TST-150 & TBT-50R

Be your own titan of cycling safety—gear up and be seen with the compact and highly visible Serfas Titan Helmet Tail Light. With a higher up and more easily noticed helmet safety light, motorists will appreciate your improved visibility and your mother will thank you for playing it safe. It features a magnetic retention system that safely breaks away during a crash, a Last Mode Memory that remembers the last mode used when you turn the light on, and easily replaceable batteries. - Powerful magnetic helmet mount system with simple install/removal - Ultra Bright Red LED (15 Lumens Max. Output) - Weight: 18g w/ Bracket - Battery: (2x) Lithium CR2032 (Pre-Installed Batteries Included w/ Plastic Pull Tab To Activate Before First Use) - Light Body Dimensions: 29 x 29 x 20mm Modes: - Solid: High – 35 Hours (6 Lumens) / Low – 45 Hours (3 Lumens) - Flash: Daytime High Flash – 60 Hours (15 Lumens) / High Flash – 40 Hours (8 Lumens) / Low Flash – 100 Hours (3 Lumens)

An economical and stylish starter headlight that uses common AA (1x) batteries. (Batteries included) Starter SL-80 Headlight: - Side Lighting For 180-Degree Visibility - AA Battery Operation - Easy Battery Access - Modes: High (80 Lumens) 1.75 Hours / Medium (40 Lumens) 3.25 Hours / Low (20 Lumens) 7.5 Hours / High Flash – 8 Hours- Daytime Flash – 10 Hours - Runtime: Up To 10 Hours (On Daytime Flash) - Weight: 90 Grams w/ Bracket

Gear up and be seen with the compact and highly visible Serfas Phoenix integrated USB rechargeable Helmet Tail Light. It's simple to install and remove with the helmet mount system and features a magnetic retention system that safely breaks away during a crash. Motorists will appreciate your improved visibility and your mother will thank you for playing it safe. - Ultra Bright Red LED (15 Lumens Max. Output) - Integrated USB Rechargeable Charge Port w/ Charge Indicator Light - Last Mode Memory (Light Remains In Last Mode Used At Power On) - Weight: 17g w/ Bracket - Battery: 250mAh Lithium Polymer - Light Body Dimensions: 32 x 55 x 18mm Modes: - Solid: High – 4 Hours (6 Lumens) / Low – 8 Hours (3 Lumens) - Flash: Daytime High Flash – 30 Hours (15 Lumens) / High Flash – 40 Hours (8 Lumens) / Low Flash – 70 Hours (3 Lumens)

Serfas' TL-200 LED is an amazing taillight. It's super bright thanks to its twin-beam 1-watt LEDs that will keep you riding safe no matter how dark it gets. It features steady, flashing and rolling modes with up to 80 hours of run time from the two included AAA batteries.

E-Lume USL-350 Headlight USL-350 E-Lume 350: - Daytime Flash Mode - Up To 80 Hrs Runtime - Extruded Aluminum Body - Integrated USB Rechargeable Li-Ion Battery - Backlit Button Indicates Charge Status and Low Battery - Handlebar Bracket - Size: 88.5mm L x 31mm W x 22.6mm H (3.48" L x 1.22" W x 0.90" H) - Weight: 142 Grams w/Bracket - Battery: 1-Cell Li-Ion - Charge Time: 2.5 hrs To Full At 700mA Using USB Wall Charger Solid Mode: - Overdrive 350 Lumens—1.1 hrs - High 250 Lumens—2.5 hrs - Medium 100 Lumens—4.25 hrs - Low 50 Lumens—7 hrs Flash Mode: - Daytime 350 Lumens—45 hrs - Low 50 Lumens—18 hrs

Serfas' Thunderbolt Taillight delivers 35 lumens in an extremely versatile, USB-rechargeable package. Attach the water-resistant silicone body nearly anywhere on your bike, and use the high, low, or two flash modes to make sure cars or cyclists can see you when approaching from behind after dark. At just 50 grams, you won't even notice it's on your bike — but others will!

Cover your six with the super bright UTL-9 Flat Panel LED Tail Light! A great everyday versatile rear-facing light easily mounted on-bike with included rubber strap mount or practically anywhere imaginable using the strong and secure built-in metal belt clip. Designed using a panel of 40 micro LEDs putting out 40 Lumens (*On Daytime Flash) of super bright red light, you'll be sure to stay visible wherever you ride. - Super bright (40 lumens) *on daytime flash - 40 micro LED panel - Large visible surface area - Gunmetal colored body - Ipx4 water resistant - Micro USB rechargeable - Built-in metal belt clip - Easy bracket angle adjustability - Solid Modes: High (20 Lumens): 3 hrs, Low (10 Lumens): 6 hrs - Flash Modes: Daytime Flash (40 Lumens) & High Flash (10 Lumens): 12 hrs - Weight: 41 Grams w/ Bracket - Battery: Lithium Polymer

Serfas' Thunderbolt Headlight delivers 90 lumens in an extremely versatile, USB-rechargeable package. Attach the water-resistant silicone body nearly anywhere on your bike, and use the high, low, or two flash modes to make sure cars, cyclists and pedestrians can see you at night. At just 50 grams, you won't even notice it's on your bike — but others will!

3-IN-1 Handlebar Mounted Accessory Holder: 3-IN-1 Design: - Headlights - Action Cameras (GoPro) - Garmin Computers (Compatible w/ Garmin Only) - Adjustable Angle (100 Degree Tilt Up/Down) - Materials: Aluminum Alloy, Nylon - Simple Installation Specs: - Length: 105mm - Width: 68mm - Height: 57mm - Weight: 76g - Snap Ring Fitment: 31.8-32mm Bars - Max Load: 400g

Quick Overview - 270 Degree High Visibility Design - Highly Adjustable Mounting System - 60 Lumens - Daytime Flash Mode - 5 Modes: 2 Solid / 3 Flash - Micro USB Rechargeable Limited Lifetime Warranty Serfas® warrants to the original purchaser that the product is free of defects in material, construction, and/or workmanship for the lifetime of the product. Battery Warranty – One Year Coverage Serfas® batteries are covered by a 1 year warranty from the original date of purchase. Features: - 60 Lumen Max Output - Micro LED Chip - Finned Lens Design Provides 270 Degree Visibility - Blue LED Charge Indicator - Daytime Flash Mode - Up To 22 Hours Runtime - Micro USB Rechargeable Specs: Solid Modes: - High – 30 Lumens / 1.5 hrs - Low – 6 Lumens / 5.5 hrs Flash Modes: - Daytime Flash – 60 Lumens / 22 hrs - High Flash – 30 Lumens / 14.5 hrs - Low Flash – 6 Lumens / 22 hrs - Weight: 26 Grams w/ Bracket Size: - Overall Height – 56.3mm (2.22?) - Main Cylindrical Body Width – 21.7mm (0.86?) - Widest Fin Width – 32.3mm (1.27?) - Charge Time: 2 hrs Using 500mA USB Wall Charger Product Package Contents: - (1) UTM-60 Cosmo 60 Lumen Tail Light - (1) Micro USB Charging Cable - (3 Sizes) Rubber Mounting Inserts - (3 Sizes) Rubber O-Ring Mounting Straps *Please note, flickering or pulsating observed in video is due to, “strobe effect,” a video capture phenomenon and is not representative of what is seen by the naked eye (steady shining light)*