Car Racks

The LoadWarrior is the perfect accessory to boost the carrying capacity of your Yakima roof rack, plus it fits many other racks, too. Ingeniously, bike mounts attach directly to the basket to make carrying bikes easy, too. This cargo carrier is big enough to handle all your gear. The LoadWarrior even comes with a custom fairing that cuts wind drag and noise.

Load up and secure bulky gear with this set of heavy-duty adjustable brackets for the LockNLoad platform rack. Designed to hold just about any hard-shelled container-including coolers, storage bins, or even a toolbox—these brackets provide peace of mind for carrying gear on any rugged adventure. The drop-in style T-slot eyebolts make them easy to install and adjust, and they pair well with Yakima Heavy-Duty Straps or other tie downs (sold separately). Designed and thoroughly tested in the rugged Australian Outback to meet Yakima's new Off-Road Rated standards. Product Details: - Secures hard-shelled containers up to 3' tall and 110 lbs./50 kg. - Heavy-duty stamped-steel construction, with a durable black-zinc coating. - Easily installs in minutes on the LockNLoad platform rack and most other T-slot equipped platforms. - Designed and thoroughly tested in the rugged Australian Outback to meet Yakima's new Off-Road Rated standards. - Packaged as a set of 4 brackets, easily pairs with our Heavy-Duty Tie Down Straps (sold separately). Product Specs: - Weight: 5.00 lbs - Dimensions: L 4.50in x W 4.00in x H 3.75in - Some assembly required, 15 minute install

Use these clamps to attach the LockNLoad platform to an existing Yakima roof rack, factory rack, or other aftermarket roof-rack system. One pair of clamps is required for each crossbar. Check your vehicle fit to verify requirements. Product Details: - Sold as a set of 2 clamps, with included hardware to attach to a single crossbar. - The LockNLoad platform requires 2 or 3 sets of Crossbar Clamps (check your vehicle's and platform's fit requirements for the number of crossbar clamps needed). - Welded steel construction for strength. - Rubber pads protect crossbar finish. - Compatible with all Yakima crossbars, along with many other aftermarket crossbars, factory crossbars, and 2" round or square tubing. - Each set of crossbar clamps adds 110 lbs. of weight capacity, up to 330 lbs., when used with 3 sets of crossbar clamps. Never exceed the Yakima- or manufacturer-specified weight limit for your vehicle. Product Specs: - Weight: 1.86 lbs - Dimensions: L 2.75in x W 1.80in x H 1.00in - Some assembly required, 15 minute install

Now you can get out there even farther, by carrying extra fuel and water on the LockNLoad platform rack. The low-profile cage height makes it easy to load the can onto your platform, while heavy-duty ratchet straps keep it secure and rattle-free. Accepts 10L or 20L plastic or metal cans. Designed and thoroughly tested in the rugged Australian Outback to meet Yakima's new Off-Road Rated standards. Product Details: - Holds 1 full 10L or 20L jerry water/fuel can made of metal or plastic, up to 45 lbs./25 kg. - Includes heavy-duty hook straps with steel ratchets, cast-steel eyelets, and a durable black-zinc coating. - Easily installs in minutes anywhere on the LockNLoad platform rack and most other T-slot equipped platforms, with an included 5 mm wrench. - Designed and thoroughly tested in the rugged Australian Outback to meet Yakima's new Off-Road Rated standards. Product Specs: - Weight: 8.00 lbs - Dimensions: L 14.00in x W 7.50in x H 4.25in - Some assembly required, 15 minute install

Amp up the utility of your LockNLoad platform rack with this set of versatile, heavy-duty aluminum perimeter rails to help secure and tie down your load. The rails also feature a convenient side channel for mounting Yakima T-slot attachments. Each kit includes a pair of front/rear rails, and a pair of side rails that easily install in the channels along the perimeter and inner slats on the platform. Designed and thoroughly tested in the rugged Australian Outback to meet Yakima's new Off-Road Rated standards. Product Details: - Loads can be secured, braced against, and/or tied down to perimeter rails. - Integrated T-slot in the perimeter rails makes it easy to attach your Yakima T-slot accessories. - Sold in sets of 4 rails (2X right/left side rails and 2X front/rear rails). - Heavy-duty hardware features a durable black-zinc coating. - Designed and thoroughly tested in the rugged Australian Outback to meet Yakima's new Off-Road Rated standards. - Fits most other T-slot equipped platforms (please verify your platform's size and compatibility before purchase). - Easily installs in minutes. - Weight: 17.80 lbs - Dimensions: L 44.00in x W 1.50in x H 3.50in

Amp up the utility of your LockNLoad platform rack with this set of versatile, heavy-duty aluminum perimeter rails to help secure and tie down your load. The rails also feature a convenient side channel for mounting Yakima T-slot attachments. Each kit includes a pair of front/rear rails, and a pair of side rails that easily install in the channels along the perimeter and inner slats on the platform. Designed and thoroughly tested in the rugged Australian Outback to meet Yakima's new Off-Road Rated standards. Product Details: - Loads can be secured, braced against, and/or tied down to perimeter rails. - Integrated T-slot in the perimeter rails makes it easy to attach your Yakima T-slot accessories. - Sold in sets of 4 rails (2X right/left side rails and 2X front/rear rails). - Heavy-duty hardware features a durable black-zinc coating. - Designed and thoroughly tested in the rugged Australian Outback to meet Yakima's new Off-Road Rated standards. - Fits most other T-slot equipped platforms (please verify your platform's size and compatibility before purchase). - Easily installs in minutes. - Weight: 22.90 lbs - Dimensions: L 65.00in x W 1.50in x H 3.50in

Amp up the utility of your LockNLoad platform rack with this set of versatile, heavy-duty aluminum perimeter rails to help secure and tie down your load. The rails also feature a convenient side channel for mounting Yakima T-slot attachments. Each kit includes a pair of front/rear rails, and a pair of side rails that easily install in the channels along the perimeter and inner slats on the platform. Designed and thoroughly tested in the rugged Australian Outback to meet Yakima's new Off-Road Rated standards. Product Details: - Loads can be secured, braced against, and/or tied down to perimeter rails. - Integrated T-slot in the perimeter rails makes it easy to attach your Yakima T-slot accessories. - Sold in sets of 4 rails (2X right/left side rails and 2X front/rear rails). - Heavy-duty hardware features a durable black-zinc coating. - Designed and thoroughly tested in the rugged Australian Outback to meet Yakima's new Off-Road Rated standards. - Fits most other T-slot equipped platforms (please verify your platform's size and compatibility before purchase). - Easily installs in minutes. - Weight: 23.70 lbs - Dimensions: L 73.00in x W 1.50in x H 3.50in

Amp up the utility of your LockNLoad platform rack with this set of versatile, heavy-duty aluminum perimeter rails to help secure and tie down your load. The rails also feature a convenient side channel for mounting Yakima T-slot attachments. Each kit includes a pair of front/rear rails, and a pair of side rails that easily install in the channels along the perimeter and inner slats on the platform. Designed and thoroughly tested in the rugged Australian Outback to meet Yakima's new Off-Road Rated standards. Product Details: - Loads can be secured, braced against, and/or tied down to perimeter rails. - Integrated T-slot in the perimeter rails makes it easy to attach your Yakima T-slot accessories. - Sold in sets of 4 rails (2X right/left side rails and 2X front/rear rails). - Heavy-duty hardware features a durable black-zinc coating. - Designed and thoroughly tested in the rugged Australian Outback to meet Yakima's new Off-Road Rated standards. - Fits most other T-slot equipped platforms (please verify your platform's size and compatibility before purchase). - Easily installs in minutes. - Weight: 20.80 lbs - Dimensions: L 73.00in x W 1.50in x H 3.50in

Amp up the utility of your LockNLoad platform rack with this set of versatile, heavy-duty aluminum perimeter rails to help secure and tie down your load. The rails also feature a convenient side channel for mounting Yakima T-slot attachments. Each kit includes a pair of front/rear rails, and a pair of side rails that easily install in the channels along the perimeter and inner slats on the platform. Designed and thoroughly tested in the rugged Australian Outback to meet Yakima's new Off-Road Rated standards. Product Details: - Loads can be secured, braced against, and/or tied down to perimeter rails. - Integrated T-slot in the perimeter rails makes it easy to attach your Yakima T-slot accessories. - Sold in sets of 4 rails (2X right/left side rails and 2X front/rear rails). - Heavy-duty hardware features a durable black-zinc coating. - Designed and thoroughly tested in the rugged Australian Outback to meet Yakima's new Off-Road Rated standards. - Fits most other T-slot equipped platforms (please verify your platform's size and compatibility before purchase). - Easily installs in minutes. - Weight: 15.40 lbs - Dimensions: L 37.00in x W 1.50in x H 3.50in

Amp up the utility of your LockNLoad platform rack with this set of versatile, heavy-duty aluminum perimeter rails to help secure and tie down your load. The rails also feature a convenient side channel for mounting Yakima T-slot attachments. Each kit includes a pair of front/rear rails, and a pair of side rails that easily install in the channels along the perimeter and inner slats on the platform. Designed and thoroughly tested in the rugged Australian Outback to meet Yakima's new Off-Road Rated standards. Product Details: - Loads can be secured, braced against, and/or tied down to perimeter rails. - Integrated T-slot in the perimeter rails makes it easy to attach your Yakima T-slot accessories. - Sold in sets of 4 rails (2X right/left side rails and 2X front/rear rails). - Heavy-duty hardware features a durable black-zinc coating. - Designed and thoroughly tested in the rugged Australian Outback to meet Yakima's new Off-Road Rated standards. - Fits most other T-slot equipped platforms (please verify your platform's size and compatibility before purchase). - Easily installs in minutes.

Build-out your vehicle to be a true adventure rig-whether to get to the local trailhead or miles from civilization. Designed and thoroughly tested in the rugged Australian Outback, the LockNLoad roof rack platform is a blank slate, ready for you to customize to your needs. Integrated T-slots throughout allow quick and easy attachment of our new LockNLoad accessories. Horizontal slats are designed to attach bike, kayak, surf, ski mounts, or even one of our SkyRise rooftop tents. The LockNLoad easily attaches to nearly any roof rack with LockNLoad Crossbar Clamps (sold separately) or directly to Yakima SkyLine and TimberLine towers with the LockNLoad SL Adapter (towers and adapter sold separately) to eliminate the need for crossbars on your vehicle. Available in 6 sizes, there's a platform sized for your vehicle that's Off-Road Rated and ready to explore. Product Details: - Attaches to your vehicle in one of two ways. Directly to an existing roof rack's crossbars using LockNLoad Crossbar Clamps (sold separately), or directly to a TimberLine or SkyLine roof rack towers with the LockNLoad SL Adapter (sold separately). - Designed and thoroughly tested in the rugged Australian Outback. - Yakima Off-Road Rated to 165–330 lbs. (depending on vehicle fit and roof type). - Side-to-side slats act like crossbars for easily mounting most bike, kayak, ski mounts and more. - Integrated T-slots in every slat and outer frame, for simple and secure attachment of T-slot and LockNLoad accessories. - Engineered aluminum construction features a textured black powder-coat finish for durability and style. - Six platform sizes ensure a perfect fit on your vehicle for a customized look. - Attaches to nearly any roof rack with LockNLoad Crossbar Clamps (sold separately). This size platform requires 2 sets of LockNLoad Crossbar Clamps. - Mounts directly to Yakima SkyLine and TimberLine towers with the LockNLoad SL Adapter (towers and adapters sold separately). - This size requires 2 sets of LockNLoad SL Adapter and 4 towers. - Full collection of new LockNLoad accessories available to complement any adventure. Product Specs: - Weight: 65.10 lbs - Dimensions: L 60.00in x W 54.00in x H 4.00in - Some assembly required, 60 minute install

Build-out your vehicle to be a true adventure rig-whether to get to the local trailhead or miles from civilization. Designed and thoroughly tested in the rugged Australian Outback, the LockNLoad roof rack platform is a blank slate, ready for you to customize to your needs. Integrated T-slots throughout allow quick and easy attachment of our new LockNLoad accessories. Horizontal slats are designed to attach bike, kayak, surf, ski mounts, or even one of our SkyRise rooftop tents. The LockNLoad easily attaches to nearly any roof rack with LockNLoad Crossbar Clamps (sold separately) or directly to Yakima SkyLine and TimberLine towers with the LockNLoad SL Adapter (towers and adapter sold separately) to eliminate the need for crossbars on your vehicle. Available in 6 sizes, there's a platform sized for your vehicle that's Off-Road Rated and ready to explore. Product Details: - Attaches to your vehicle in one of two ways. Directly to an existing roof racks crossbars using LockNLoad Crossbar Clamps (sold separately), or directly to a TimberLine or SkyLine roof rack towers with the LockNLoad SL Adapter (sold separately). - Designed and thoroughly tested in the rugged Australian Outback. - Yakima Off-Road Rated to 165–330 lbs. (depending on vehicle fit and roof type). - Side-to-side slats act like crossbars for easily mounting most bike, kayak, ski mounts and more. - Integrated T-slots in every slat and outer frame, for simple and secure attachment of T-slot and LockNLoad accessories. - Engineered aluminum construction features a textured black powder-coat finish for durability and style. - Six platform sizes ensure a perfect fit on your vehicle for a customized look. - Attaches to nearly any roof rack with LockNLoad Crossbar Clamps (sold separately). - This size platform requires 2 sets of LockNLoad Crossbar Clamps. - Mounts directly to Yakima SkyLine and TimberLine towers with the LockNLoad SL Adapter (towers and adapters sold separately). - This size requires 2 sets of LockNLoad SL Adapter and 4 towers. - Full collection of new LockNLoad accessories available to complement any adventure. Product Specs: - Weight: 71.81 lbs - Dimensions: L 84.00in x W 49.00in x H 4.00in - Some assembly required, 60 minute install

Build-out your vehicle to be a true adventure rig-whether to get to the local trailhead or miles from civilization. Designed and thoroughly tested in the rugged Australian Outback, the LockNLoad roof rack platform is a blank slate, ready for you to customize to your needs. Integrated T-slots throughout allow quick and easy attachment of our new LockNLoad accessories. Horizontal slats are designed to attach bike, kayak, surf, ski mounts, or even one of our SkyRise rooftop tents. The LockNLoad easily attaches to nearly any roof rack with LockNLoad Crossbar Clamps (sold separately) or directly to Yakima SkyLine and TimberLine towers with the LockNLoad SL Adapter (towers and adapter sold separately) to eliminate the need for crossbars on your vehicle. Available in 6 sizes, there's a platform sized for your vehicle that's Off-Road Rated and ready to explore. Product Details: - Attaches to your vehicle in one of two ways. Directly to an existing roof racks crossbars using LockNLoad Crossbar Clamps (sold separately), or directly to a TimberLine or SkyLine roof rack towers with the LockNLoad SL Adapter (sold separately. - Designed and thoroughly tested in the rugged Australian Outback. - Yakima Off-Road Rated to 165–330 lbs. (depending on vehicle fit and roof type). - Side-to-side slats act like crossbars for easily mounting most bike, kayak, ski mounts and more. - Integrated T-slots in every slat and outer frame, for simple and secure attachment of T-slot and LockNLoad accessories. - Engineered aluminum construction features a textured black powder-coat finish for durability and style. - Six platform sizes ensure a perfect fit on your vehicle for a customized look. - Attaches to nearly any roof rack with LockNLoad Crossbar Clamps (sold separately). This size platform requires 2 sets of LockNLoad Crossbar Clamps. - Mounts directly to Yakima SkyLine and TimberLine towers with the LockNLoad SL Adapter (towers and adapters sold separately). - This size requires 2 sets of LockNLoad SL Adapter and 4 towers. - Full collection of new LockNLoad accessories available to complement any adventure. Product Specs: - Weight: 84.57 lbs - Dimensions: L 84.00in x W 62.00in x H 4.00in - Some assembly required, 60 minute install

Build-out your vehicle to be a true adventure rig-whether to get to the local trailhead or miles from civilization. Designed and thoroughly tested in the rugged Australian Outback, the LockNLoad roof rack platform is a blank slate, ready for you to customize to your needs. Integrated T-slots throughout allow quick and easy attachment of our new LockNLoad accessories. Horizontal slats are designed to attach bike, kayak, surf, ski mounts, or even one of our SkyRise rooftop tents. The LockNLoad easily attaches to nearly any roof rack with LockNLoad Crossbar Clamps (sold separately) or directly to Yakima SkyLine and TimberLine towers with the LockNLoad SL Adapter (towers and adapter sold separately) to eliminate the need for crossbars on your vehicle. Available in 6 sizes, there's a platform sized for your vehicle that's Off-Road Rated and ready to explore. Product Details: - Attaches to your vehicle in one of two ways. Directly to an existing roof racks crossbars using LockNLoad Crossbar Clamps (sold separately), or directly to a TimberLine or SkyLine roof rack towers with the LockNLoad SL Adapter (sold separately). - Designed and thoroughly tested in the rugged Australian Outback. - Yakima Off-Road Rated to 165–330 lbs. (depending on vehicle fit and roof type). - Side-to-side slats act like crossbars for easily mounting most bike, kayak, ski mounts and more. - Integrated T-slots in every slat and outer frame, for simple and secure attachment of T-slot and LockNLoad accessories. - Engineered aluminum construction features a textured black powder-coat finish for durability and style. - Six platform sizes ensure a perfect fit on your vehicle for a customized look. - Attaches to nearly any roof rack with LockNLoad Crossbar Clamps (sold separately). - This size platform requires 2 sets of LockNLoad Crossbar Clamps. - Mounts directly to Yakima SkyLine and TimberLine towers with the LockNLoad SL Adapter (towers and adapters sold separately). - This size requires 2 sets of LockNLoad SL Adapter and 4 towers. - Limited Lifetime Warranty. - Full collection of new LockNLoad accessories available to complement any adventure. Product Specs: - Weight: 73.00 lbs - Dimensions: L 76.00in x W 65.00in x H 4.00in - Some assembly required, 60 minute install

Build-out your vehicle to be a true adventure rig-whether to get to the local trailhead or miles from civilization. Designed and thoroughly tested in the rugged Australian Outback, the LockNLoad roof rack platform is a blank slate, ready for you to customize to your needs. Integrated T-slots throughout allow quick and easy attachment of our new LockNLoad accessories. Horizontal slats are designed to attach bike, kayak, surf, ski mounts, or even one of our SkyRise rooftop tents. The LockNLoad easily attaches to nearly any roof rack with LockNLoad Crossbar Clamps (sold separately) or directly to Yakima SkyLine and TimberLine towers with the LockNLoad SL Adapter (towers and adapter sold separately) to eliminate the need for crossbars on your vehicle. Available in 6 sizes, there's a platform sized for your vehicle that's Off-Road Rated and ready to explore. Product Details: - Attaches to your vehicle in one of two ways. Directly to an existing roof racks crossbars using LockNLoad Crossbar Clamps (sold separately), or directly to a TimberLine or SkyLine roof rack towers with the LockNLoad SL Adapter (sold separately). - Designed and thoroughly tested in the rugged Australian Outback. - Yakima Off-Road Rated to 165–330 lbs. (depending on vehicle fit and roof type). - Side-to-side slats act like crossbars for easily mounting most bike, kayak, ski mounts and more. - Integrated T-slots in every slat and outer frame, for simple and secure attachment of T-slot and LockNLoad accessories. - Engineered aluminum construction features a textured black powder-coat finish for durability and style. - Six platform sizes ensure a perfect fit on your vehicle for a customized look. - Attaches to nearly any roof rack with LockNLoad Crossbar Clamps (sold separately). - This size platform requires 2 sets of LockNLoad Crossbar Clamps. - Mounts directly to Yakima SkyLine and TimberLine towers with the LockNLoad SL Adapter (towers and adapters sold separately). - This size requires 2 sets of LockNLoad SL Adapter and 4 towers. - Full collection of new LockNLoad accessories available to complement any adventure. Product Specs: - Weight: 55.10 lbs - Dimensions: L 55.00in x W 49.00in x H 4.00in - Some assembly required, 60 minute install

Build-out your vehicle to be a true adventure rig-whether to get to the local trailhead or miles from civilization. Designed and thoroughly tested in the rugged Australian Outback, the LockNLoad roof rack platform is a blank slate, ready for you to customize to your needs. Integrated T-slots throughout allow quick and easy attachment of our new LockNLoad accessories. Horizontal slats are designed to attach bike, kayak, surf, ski mounts, or even one of our SkyRise rooftop tents. The LockNLoad easily attaches to nearly any roof rack with LockNLoad Crossbar Clamps (sold separately) or directly to Yakima SkyLine and TimberLine towers with the LockNLoad SL Adapter (towers and adapter sold separately) to eliminate the need for crossbars on your vehicle. Available in 6 sizes, there's a platform sized for your vehicle that's Off-Road Rated and ready to explore. Product Details: - Attaches to your vehicle in one of two ways. Directly to an existing roof racks crossbars using LockNLoad Crossbar Clamps (sold separately), or directly to a TimberLine or SkyLine roof rack towers with the LockNLoad SL Adapter (sold separately). - Designed and thoroughly tested in the rugged Australian Outback. - Yakima Off-Road Rated to 165–330 lbs. (depending on vehicle fit and roof type). - Side-to-side slats act like crossbars for easily mounting most bike, kayak, ski mounts and more. - Integrated T-slots in every slat and outer frame, for simple and secure attachment of T-slot and LockNLoad accessories. - Engineered aluminum construction features a textured black powder-coat finish for durability and style. - Six platform sizes ensure a perfect fit on your vehicle for a customized look. - Attaches to nearly any roof rack with LockNLoad Crossbar Clamps (sold separately). - This size platform requires 2 sets of LockNLoad Crossbar Clamps. - Mounts directly to Yakima SkyLine and TimberLine towers with the LockNLoad SL Adapter (towers and adapters sold separately). - - This size requires 2 sets of LockNLoad SL Adapter and 4 towers. - Full collection of new LockNLoad accessories available to complement any adventure. Product Specs: - Weight: 76.53 lbs - Dimensions: L 84.00in x W 54.00in x H 4.00in - Some assembly required, 60 minute install

Use these adapters to attach the LockNLoad platform directly to the Yakima TimberLine and SkyLine towers. They eliminate the need for a traditional crossbar, and put the platform lower and closer to the roof-giving your rig a clean, customized look. One pair of LockNLoad SL Adapters required for each pair of towers. Check your vehicle fit to verify requirements Product Details: - Sold as a set of 2 adapters with included hardware to attach to 2 Yakima TimberLine or SkyLine towers (towers sold separately). - Structural steel brackets with powder-coat finish for durability and resistance to the elements. - The LockNLoad platform requires 2 or 3 sets of adapters (check your vehicle's and platform's fit requirements for number of adapters needed). - Only compatible with Yakima SkyLine and TimberLine towers. - Each set of adapters adds 110 lbs. of weight capacity, up to 330 lbs., when used with 3 sets of adapters and towers. Never exceed the Yakima-specified weight limit for your vehicle. Product Specs: - Weight: 0.50 lbs - Some assembly required, 60 minute install

Getting a flat's no problem when you secure a spare tire to the LockNLoad platform rack with this heavy-duty retention kit. The T-slot, drop-in style eyebolt hardware allows quick adjustment and removal. Sturdy stainless-steel ratchet straps take up the slack to hold most common size off-road tires in place for any adventure. Designed and thoroughly tested in the rugged Australian Outback to meet Yakima's new Off-Road Rated standards. Product Details: - Holds 1 wheel with tire, up to 100 lbs. - Holds max tire size of 42 x 17R - Easily installs in minutes anywhere on your LockNLoad platform rack. - Includes heavy-duty hook straps with steel ratchets, cast-steel eyelets, and a durable black-zinc coating. - Designed and thoroughly tested in the rugged Australian Outback to meet Yakima's new Off-Road Rated standards. Product Specs: - Weight: 3.20 lbs - Dimensions: L 7.00in x W 5.00in x H 2.00in

If you've got a truck bed or pretty much anywhere you can insert a couple bolts, you've got yourself a place to install this handy fork-style bike mount. This one comes with a locking single-sided adjustment skewer so you can secure your bike easily. Includes SKS lock core and two SKS keys. - A "bolt anywhere" fork-style bike mount - Fits bikes with 9mm x 100mm front hubs - Locking single-sided adjustment skewer with long throw for easy bike loading. SKS Lock Core included - Corrosion-resistant anodized aluminum construction Product Specs: - Weight: 1.45 lbs. - Limited Lifetime Warranty

Add an additional OffGrid Accessory Bar to custom fit those bulky items in your OffGrid cargo basket. Pin in those coolers, tackle boxes, and duffels to ensure a secure fit for the long haul. Fits Large OffGrid only. Product Details - Accessory Bar for Large OffGrid cargo basket - Quickly attaches to basket frame to help organize bulky items - Mount Yakima gear mounts on top for a true multi-sport adventure - Made from durable, steel for years of rugged use - Compatible with Large OffGrid basket only - 10 Minute Install Sizing: - Large: Weight: 3.43 lbs, Dimensions: L 49.00" x W 1.12" x H 1.12" - Medium: Weight: 2.68 lbs, Dimensions: L 40.00" x W 1.12" x H 1.12"

The OffGrid Extension adds 40% more capacity to your OffGrid cargo basket. Installation is easy—just plug it in, tighten it down, load it up, and hit the road. At 22" long, it frees you to bring another cooler, a box of firewood, or a couple more duffels. Fits Large OffGrid only. Product Details - Extension for the Large OffGrid cargo basket - Adds 22" in length - Made from durable, steel for years of rugged use - Simple installation with plug-in design - Compatible with Large OffGrid basket only Product Specs - Weight: 17.60 lbs - Dimensions: L 22.00in x W 49.00in x H 7.00in

The OffGrid Extension adds 40% more capacity to your OffGrid cargo basket. Installation is easy - just plug it in, tighten it down, load it up, and hit the road. At 18" long, it frees you to bring another cooler, a box of firewood, or a couple more duffels. Fits Medium OffGrid only. Product Details - Extension for the Medium OffGrid cargo basket - Adds 18” in length - Made from durable, steel for years of rugged use - Simple installation with plug-in design - Compatible with Medium OffGrid basket only Product Specs - Weight: 12.50 lbs - Dimensions: L 18.00" x W 40.00"x H 7.00"

Don't want to cook right at the car? Set up your EXO OpenRange just about anywhere with this adjustable leg kit. Perfect for off-the-grid camping, stadium tailgating, and everything in between. PRODUCT DETAILS - Securely attaches and supports EXO OpenRange - Telescoping legs provide height adjustment from 20-33" - Heavy duty steel construction for stability and powder coated finish for long-term durability - Included storage bag protects the Leg Kit when not in use and can be stowed inside OpenRange PRODUCT SPECS - Weight: 13.50 lbs. - Dimensions: L 19.00 in x W 12.00 in x H 33.00 in - Limited Two Year Warranty

Expand the cooking surface on your EXO OpenRange with this metal side table. PRODUCT DETAILS - 16" x 31" Powder coated steel surface is heat resistant and perfect for stove use - Height adjustable support leg (26-44"), to level out the table - Metal rod folds out to support camp stove propane tanks, or doubles as a towel rack - Included storage bag helps protects the side table for in-vehicle storage PRODUCT SPECS - Weight: 13.50 lbs. - Dimensions: L 31.00 in x W 16.00 in x H 0.50 in - Limited Two Year Warranty

Expand the food prep zone on your EXO OpenRange with this bamboo wood side table and nesting cutting board. PRODUCT DETAILS - 13" x 27" UV protected Bamboo table with a premium finish - Height-adjustable support leg (26-44"), to level out the table - Includes plastic cutting board and collapsible wash basin with drain hose that nests into the table surface cutout - Included storage bag protects the side table when not in use and can be stowed inside OpenRange PRODUCT SPECS - Weight: 5.50 lbs. - Dimensions: L 27.00 in x W 13.00 in x H 0.50 in - Limited Two Year Warranty

The versatile, no-drill Outdoorsman lets you create a top-of-vehicle truck rack system for your full-size pickup truck—without the need for a camper shell—while leaving you full access to the truck bed. - Clamps onto truck bed rails without any drilling - The perfect rack solution for everyday hauling of ladders and lumber - Heavy-duty construction handles up to 300 lbs - Sold in pairs; combine single pair with racks on truck roof or combine two pairs for complete system Product Specs: - Weight: 25.00 lbs. - Dimensions: L 16.00 in x W 2.00 in x H 29.00 in - Limited Lifetime Warranty

Our dependable new Recovery Track Mount is a smart, quick, secure way to keep recovery tracks on hand and within reach. Now you can deploy them whenever you need traction. Easy to install and use, this mount is designed to work with our Truck Collection’s HD Bars and SideBar, along with most other T-slot crossbars. - Holds up to four MAXTRAX MKII, TRED Pro or TRED 800/1100 recovery tracks - Durable molded base is built for rugged travel in a range of conditions - Tracks stay secure with Yakima Heavy-Duty Straps for a confident hold on rugged terrain - Attaches to the SideBar accessory on the OverHaul HD or OutPost HD and to the HD Bar or other T-slot style crossbars - Includes hardware for both HD Bar and standard T-slot crossbars - Requires 20–35" (49–89 cm) crossbar spread range (unless paired with SideBar) - 35-lb. load capacity - Weight: 3.20 lbs - Dimensions: L 10.00in x W 3.00in x H 11.50in - Some assembly required, 5 minute install

Simple and compact, the ReelDeal fishing rod mount securely carries up to 8 full-length fishing rods of just about any style on your roof rack—instead of in your vehicle. It's the safe, easy way to transport your rods fully rigged-up and ready to fish. The single-button side access makes for quick loading/unloading and the included SKS (Same Key System) locks keep your rods safe and secure. Product Details: - Carries up to 8 fully rigged-up fishing rods of just about any style. - 15.5" of full-length padding securely holds and protects rods. - Tool-free clamp design makes install and removal a breeze. - Universal mounting hardware fits all Yakima crossbars and most other roof racks. - Integrated SKS (Same Key System) locks included for added security. - ReelDeal also can transport up to 2 snowboards and/or 4 pairs of skis. Product Specs: - Weight: 6.50 lbs - Dimensions: L 22.00in x W 6.00in x H 6.50in

Here's a hitch rack that goes long on features. Starring the UpperHand control lever that tilts the rack to make access to your vehicle a cinch. Also includes zero-hassle ZipStrips to secure your bike, folds flat for easy storage and to top it off is fully assembled out of the box. - No garage required. Comes fully assembled with no bits and pieces. - New UpperHand lever tilts rack down for vehicle access and folds it flat for storage. - New ZipStrips secure bikes to the rack and are fully removable. - Tool-free SpeedKnob quickly tightens and lock the rack to your car. - Anti-sway cradles eliminate bike-to-bike contact. - Enjoy a cold one with the Yakima signature bottle opener. - Available TubeTop (sold separately) is required for non-conventional, step-through, BMX, and kid's bikes as well as some full suspension bikes. - Fits 1.25" and 2" hitch receiver. - Carries up to 5 bikes. Also available in a 2 or 4 bike capacity. - Lock your bikes to the rack with the HandCuff locking cable (sold separately). Product Specs: - Weight: 35.60 lbs. - Dimensions: L 44.00 in x W 12.00 in x H 16.00 in - Limited Lifetime Warranty

Tailored to precisely fit flush-mount factory side rails, RidgeClips secure the RidgeLine Towers to your aerodynamic rooftop. Created in different designs to fit specific vehicles, they have a brilliant clip design that’s super strong, easy to install, and holds on tight. - Ingenious clips designed to attach RidgeLine Towers to flush-mount factory side rails - Range of shapes lets you find the precise, secure fit specific to your vehicle - Unique inner and outer clip design delivers exceptional hold - Powder-coated stainless steel provides maximum strength and durability - Sold in sets of four – just one kit sets up your system